Nachdem ich mir einen -augenscheinlich- sehr guten Stick von NooElec bestellt habe:

https://www.amazon.de/NooElec-NESDR-...words=rtl2832u

wollte ich den nächsten Test mit komplett neuer Konfiguration fahren.
Die Blacklist habe ich mit RTL28xxx etc. versehen.

Multimon NG ist installiert.
Da es die neue Variante vom RTL2832u ist, bekomme ich bei "rtl_test" die Meldung:

pi@raspberrypi:~ $ rtl_test
Found 1 device(s):
0: Realtek, RTL2838UHIDIR, SN: 00000001

Using device 0: Generic RTL2832U OEM
Found Rafael Micro R820T tuner
Supported gain values (29): 0.0 0.9 1.4 2.7 3.7 7.7 8.7 12.5 14.4 15.7 16.6 19.7 20.7 22.9 25.4 28.0 29.7 32.8 33.8 36.4 37.2 38.6 40.2 42.1 43.4 43.9 44.5 48.0 49.6
[R82XX] PLL not locked!
Sampling at 2048000 S/s.

Info: This tool will continuously read from the device, and report if
samples get lost. If you observe no further output, everything is fine.

Reading samples in async mode...
lost at least 16 bytes




Will ich aber BOSWatch ausführen, gibt es nur folgenden Fehler:

pi@raspberrypi:~/BOSWatch $ sudo python boswatch.py -f 17x.xxxM -a POC1200
usage: boswatch.py [-h] -f FREQ -d DEVICE [-e ERROR] -a
{FMS,ZVEI,POC512,POC1200,POC2400}
[{FMS,ZVEI,POC512,POC1200,POC2400} ...] [-s SQUELCH]
[-g GAIN] [-u] [-v] [-q]
boswatch.py: error: argument -d/--device is required

Weiß jemand Rat?
Vielen Dank schon mal :)

Grüße
Newman